Olive Wax for Molded Candles and Melts - Ecoolive

Take your candle creations to the next level with our Olive Wax for Molded Candles and Melts , a blend specifically developed for the production of molded pillar candles.

This is a 100% vegetable wax , mainly made from olive wax, blended with natural additives to enhance combustion and fragrance diffusion. This wax is completely free from animal products, paraffin or palm and has not been tested on animals. It is biodegradable and suitable for vegans.

Excellent fragrance diffusion and smooth finish

EcoOlive PillarBlend offers excellent fragrance release, both hot and cold, and a smooth surface finish with a subtle sheen. It requires only one pour and is easily removed from the molds. This wax can accommodate a fragrance load of up to 12% with fragrance oils designed for use with waxes.

Tips for making this Kerax wax

For best results, we recommend melting this wax at approximately 75 degrees Celsius and pouring at 65 degrees . A curing time of 48 hours is recommended . As with all candle making, we encourage you to conduct thorough testing with all combinations of wax, fragrance oil, and wick.

We recommend our various guides for making your scented wax melts.

Using this Eco Olive Pilar

Mussels

Your molds must be clean and free of contaminants. They should be at least at room temperature, although preheating to around 45-50°C can be beneficial.

Dyes

If using powdered dyes, heat the wax to approximately 75°C , add the dye and stir until dissolved. Powdered dyes can also be dissolved in the fragrance before adding to the melted wax.

Perfumes

This olive wax for molded candles and melts has been designed for use with fragrances at levels between 5-12%. The use of fragrances specifically developed for natural waxes is highly recommended.

Highlights

Natural waxes tend to require larger wicks than traditional paraffin waxes. The fragrance, dye, and configuration of the candle have a significant impact on choosing the best wick.

Casting and filling

Temporarily high temperatures (up to 90°C) have no negative effects as long as the wax is cooled quickly. Allow the wax to cool to the desired filling temperature, add the fragrance, and stir well.

Filling process

Depending on the type and size of the mold, the fragrance, the colorant used, and the desired effect, filling temperatures can vary. For best demolding, it is recommended to pour at a temperature of around 65°C, although this will depend on the size and shape of the candle being produced. Add and mix the fragrance just before filling, if possible. If you are having difficulty with the filling temperature, try increasing or decreasing the temperature in 5-10°C increments . Consider using preheated molds to improve demolding.

Two-step filling

EcoOlive Olive Wax for Molded Candles is designed to require a single pour. However, for some larger candles, additional filling may be necessary to achieve a perfect candle surface. A small amount of wax at a slightly higher temperature than the initial filling can be used to top off the candle before it has completely cooled.

Cooling the spark plugs

Allow the candles to cool slowly to room temperature (approximately 25°C) . The candles should be left undisturbed for 48 hours before testing.

Combustion test

It's important to check the wick. Test the candle for burn pool diameter and mushrooming after it has cooled for 48 hours. Experiment with different wicks until you achieve the desired burn pool diameter and a nice, clean flame.

Each combination of size, wax, dye, fragrance, and wick must be tested to achieve the optimal candle.

The color and shape of the chips may vary depending on the arrival and harvest.