The fire retardant for dried flowers and dried plants serves to delay the ignition and limit the afterburning of dried flowers and natural plant fibre materials that can be impregnated. Its exceptional effectiveness requires small quantities. It has a very high penetration capacity and is easy to apply.
This fire retardant for dried flowers and dried plants is liquid (VOC and formaldehyde free), odourless and colourless. It is ready to use and intended for impregnation. It can be coloured (powder or liquid acrylic dye) to obtain an aesthetic effect.
You can find our dried flowers here !
Instructions for use
The surface must be dry, free of dust, oil, wax, grease, dirt, resin, etc. The fireproof product for dried flowers and dried plants can be applied in 2 ways on dry, porous surfaces, front/back + edges:
- By spraying.
- By soaking (total immersion in the fireproof product).
It is advisable to allow the product to dry between 12 and 72 hours, depending on temperature and humidity, either naturally or accelerated. A slight shrinkage of the fibre may occur.
The prescribed dose is 30% of the mass of the substrate.
The fireproof product for dried flowers and dried plants can be stored for 24 months in its original hermetic packaging, closed for 100% efficiency.
Storage temperature 0°C to + 50°C.
Keep out of reach of children
- For people with sensitive skin, irritation may occur in case of skin contact, rinse with soap and water
- In case of contact with the eyes, rinse with clear water for several minutes while spreading the eyelids, consult an ophthalmologist
- If swallowed: consult a doctor, the ambulance or the Poison Control Centre
|Type of use||Delays inflammation of dried flowers and dry plants|
|Packaging||Liquid Per unit|
|Regulatory advice phrase and precautions for use:||Dangerous. Follow usage precautions. Read the label and product information before using.|
No english reviews, but there are some in french. See reviews