Medium-grit abrasive paper - 25 mm diameter

Medium-grit abrasive paper for Jesmonite® creations

Medium-grit abrasive paper is the ideal accessory for perfecting the finish of your Jesmonite® creations. Sold in a set of 10, it is designed for manual sanding: it easily corrects small imperfections, softens edges and gives a smooth, even surface before applying a sealant or protective finish.

What is this abrasive paper for?

After demoulding, some creations show slight irregularities, burrs or parting-line marks. Thanks to its medium grit, this paper lets you:

• Remove small surface imperfections
• Smooth edges and corners
• Even out the finish before finer sanding steps
• Effectively prepare the surface before applying a sealant

How to use

Attach your abrasive paper to the hook-and-loop surface of a compatible 25 mm diameter block. Sand the creation using light, even pressure. Once the paper is worn, simply replace it with a new one, without changing the block.

Tip: to limit dust and achieve an even cleaner finish, wet sanding is recommended on Jesmonite® creations.

Care

Reusable and durable when properly cared for:

• Remove dust by lightly tapping the paper or rinsing it with clean water after use.
• If residue remains, clean it with a little mild soap then rinse thoroughly.
• Let it dry completely in the open air before storing (do not store it damp).
• Avoid solvents and harsh chemicals.
• Replace the paper when it shows significant signs of wear.