ECO waxed wicks mounted on support

Wicks for container candles mounted on a holder (ECO)

These wicks are specially designed for making poured candles (container candles, scented candles).

Some ECO series drill bits are now replaced by STABILO drill bits.

• Stabilo 2 replaces Eco 0.2: 30 - 35 mm 120 mm
• Stabilo 3 replaces Eco 0.50: 35 - 50 mm 120 mm
• Stabilo 4 replaces Eco 0.75: 50 - 54 mm 120 mm

Particularly pretty, ECO wicks are made in Europe from natural flat cotton threads interwoven with paper threads which produce a rigid structure.
The flame is even, the ECO wicks work well with vegetable waxes and ensure an even burn.

ECO candle wicks are guaranteed lead- and zinc-free. To help you choose the right wick for your candle, check out our wick guide.

Our wicks are untreated and comply with European REACH regulations.

Choosing the right wick

It is important to choose your wick carefully according to the diameter of your glass.
If you use perfume and/or colorants, it will be advisable to take a larger size.

This size chart below is a rough guide - different waxes, fragrances and colors all have an effect on the candle wick.
Trial and error is the only way to ensure correct wicking.

An improperly fitted, low-wattage wick will cause a crater.

A wick that is too powerful will cause a large flame with significant consumption.
A well-fitted wick melts the wax across the entire diameter with a height of 10 mm (pool).

Feel free to check out our related articles on the subject!

Our advice for your ECO wick

To use a coated wick on a base, pour 2 mm of liquid wax into your container and immediately add your coated wick to the bottom to hold it in place. This way, after 15 seconds, your wick will be perfectly set in the wax. Then, fill your container, leaving 7 mm of wick on the surface.

Remember, depending on the dosage and type of wax and/or dye, it's important to test to find the right wick for your candles. If you have trouble choosing, we invite you to consult our guide.